Timac Rotary Flanging Machines
TFF-1300
Flanging-punching Machines
- Flanging and flange hole punching on cylindrical elements, even if obtained from polygonal blanks (ex: fan casings).
- Number of holes and punching pitch customized and programmable.
- Possibility to machine a semi-curling on the flange.
- Fully automated work cycle
| Model | Diameter | Thickness |
|---|---|---|
| TFF 1300 | 500-1300 mm (20-50 in) |
3 mm (0.12 in) |
TFFP-1300
Beading-punching Machine for Dish Bottoms
- Axial and radial punching and beading of domed dish bottoms (ex: parabolic antennae for telecommunications).
- Programmable number and pitch of the radial holes.
- Customized number and position of the axial holes.
- Special beading profiles or trimming of the vertical edge are available on request.
- Fully automated work cycle
| Model | Diameter | Thickness |
|---|---|---|
| TFFP 1300 | 1200 mm (47 in) |
1.5 mm (0.06 in) |
TFF-2M
Automatic Line for Flange Application on Expansion Vessel Shells
- Punching of the axial hole and automatic application of the flange onto expansion vessel shells.
- Forming of the valve seat and punching of the valve hole on request.
- Punching of the axial hole and automatic application of the flange onto expansion vessel shells.
- Average production of up to 260 pcs/h
| Model | Diameter | Thickness |
|---|---|---|
| TFF 2M | n/a | n/a |
TFF-CC
Automatic Line for Flange Application
- Punching of the axial hole and automatic application of the flange onto hot water tank shells.
- Punching of holes for pipes on request.
- Tooling for diameter change over takes max. 15 min.
- Easy integration in existing line.
- Average production of up to 330 pcs/h.
| Model | Diameter | Thickness |
|---|---|---|
| TFF-CC | 443/500 mm (18/20 in) |
1.65 mm (0.06 in) |
TPCR-5
Automatic Punching Machine for Wheel Rim Valve Holes
- Punching of a hole and forming of the valve seat on wheel rims.
- Loading, machining and unloading of the wheel rim are fully automated to allow in-line integration
- Average production of 120 pcs/h
| Model | Diameter | Thickness |
|---|---|---|
| TPCR 5 | 380-610 mm (15-24 in) |
5 mm (0.19 in) |
TTT-1102
Tube Cutting Machine
- Tailored cut tubes, no burrs, starting from a 1000-m long tube.
- Programmable length of cut.
- Customized dimensions on request.
- Automatic cutting cycle and unloading
- Manual unloading
| Model | Diameter | Thickness | Length |
|---|---|---|---|
| TTT 1002 | 100-220 mm (5-9 in) |
2 mm (0.08 in) |
max 300 mm (12 in) |