TCDA-Q
Automatic Disc Shearing Lines Starting from Square Blanks
- Discs cut out of sheet metal square blanks
- Fully automated work cycle, from the stack of blanks to the stack of discs
- Production of up to 280 pcs/h
| Model | Diameter | Thickness |
|---|---|---|
| TCDA 2010 | 500-2200 mm (20-87 in) | 10 mm (0.39 in) |
TZZ
Automatic Multi-disc Shear Starting from Coil
- Discs cut out of sheet metal strip with a fully automated work cycle
- Cutting the discs in offset lay-out on the strip optimizes the use of material
- Flexible diameter change over
- Use different strip widths on the same machine
- Average production of up to 360/450 pcs/h
| Model | Diameter | Thickness |
|---|---|---|
| TZZ-F 803 | 250-750 mm (10-29 in) | 3 mm (0.12 in) |
| TZZ 1253 | 350-700 mm (14-27 in | 3 mm (0.12 in) |
| TZZ-2R 1254 | 350-700 mm (14-27 in) | 4 mm (0.16 in) |
| TZZ-2R 1604 | 450-860 mm (18-33 in) | 4 mm (0.16 in) |
